Archers 4 Termites is now part of Syndicate Pest Solutions · Same local termite care, a bigger team behind it
Termite services

Termites don’t announce themselves.

By the time you see damage, the colony has usually been at work for years. The Sunshine Coast is one of the highest termite-pressure areas in the country, so we treat inspections as a discipline, not a sales pitch.

Book an inspectionCall 0412 466 600
How we handle termites

Inspect. Treat. Monitor.

01

Inspect

Moisture readings and a full subfloor, roof void and perimeter check, not just a torch and a hunch. You get a written report you can actually read.

Inspections →
02

Treat

Chemical and non-chemical barrier options, explained honestly and matched to your home’s construction and your needs.

Detection & treatment →
03

Monitor

Baiting programs monitored between visits, so a new colony doesn’t get a free run at your frame.

Reduce your risk →
Inspections

Have your home checked every 12 months.

Coastal Queensland is one of the highest termite-risk areas in Australia, so regular inspections are the most important part of protecting your home. By the time you see damage, the colony has usually been at work for a long time.

A termite inspection isn’t a quick job. We take our time and care for your property as if it were our own.

What an inspection covers

  • Inside the home, the roof void and the subfloor, where accessible
  • The outside perimeter, fences, stumps and garden timber
  • Moisture problems that attract termites
  • A written report on what we found and what we recommend
Buying a home? Ask about a pre-purchase timber and termite inspection before you sign.
Found termites?

Don’t panic. Don’t disturb them.

Leave them alone. Don’t spray them, break open the mud tunnels or remove damaged timber. Disturbed termites retreat and come back somewhere else, which makes the colony harder to find.

Signs to look for

  • Mud tunnels on walls, subfloors or foundations
  • Timber that sounds hollow when you tap it
  • Discarded wings near windows and doors
  • Bubbling or peeling paint
  • Doors and windows that suddenly stick

What happens next

  1. Tell us what you’re seeing. Call 0412 466 600, send an enquiry, or snap a photo with our Pest Identifier.
  2. We inspect and level with you. A licensed technician finds the source and explains your options clearly before any work starts.
  3. We do the work. Targeted treatment around your family and pets, with no mess left behind and no shortcuts taken.
  4. We make sure it holds. Follow-up checks and a written report, so you know exactly what was done and what happens next.
Call 0412 466 600
Detection

Finding termites without guesswork.

Modern termite detection uses moisture meters, thermal imaging and radar sensors to find termite activity inside walls and timber, often without drilling or damage. Archers was an early user of the Australian-made Termatrac detector, which combines all three.

Treatment & barriers

Eliminate the colony, not just the ones you see.

Modern non-repellent termiticides, such as Termidor, are carried back to the nest by the termites themselves, spreading the treatment through the whole colony. Options include chemical treatment zones around and under the home, and baiting and monitoring programs, matched to your home’s construction.

Prevention

12 ways to reduce your termite risk.

  • Keep weep holes clear, with at least 75 mm between the ground and the weep holes.
  • Keep garden beds away from the outside walls of your home.
  • Store timber off the ground, or on concrete.
  • Have dead trees in the yard inspected; they may need treating or removing.
  • Remove dead branches and leftover vegetation, and cut back trees close to the home.
  • Keep subfloors clean, dry and well ventilated.
  • Fix leaking pipes, taps, showers, gutters and downpipes.
  • Seal cracks in your home’s foundations.
  • Fix damp areas or pooling water in the yard.
  • Keep watering systems away from the outside walls and foundations.
  • Make sure hot water and air conditioning overflow pipes don’t drip onto the foundations.
  • Most importantly, have your home inspected every 12 months.
Know your termites

Three types to know.

Subterranean

Live in the soil and reach buildings through mud tunnels or by eating through timber. They need ground contact for moisture, and they’re the most common cause of damage to homes.

Drywood

Live in dry timber and get their moisture from the wood they eat. Slow eaters, but they attack a wide range of timbers, including floors, frames and furniture.

Dampwood

Survive on high-moisture timber such as damp logs, rotting wood and dead trees, often where wood touches the ground. Store timber off the ground.

Termite or ant?

Ants and termites aren’t related, but winged ones are easy to confuse. Here’s how to tell them apart. Learn more at the Australian Museum.

  • Waist: termites have none; ants have a narrow waist.
  • Antennae: termites’ are straight and bead-like; ants’ are bent.
  • Wings: a termite’s four wings are the same size; an ant’s rear wings are smaller.
  • Body: termites are pale and soft-bodied; ants are harder.
Pest Identifier

Not sure what you’ve found?

Snap a photo and Syndicate’s free Pest Identifier will tell you what it most likely is and which treatment fits.

Identify a pest ↗ (opens in a new tab)
Seen something?

Get it checked before it spreads.

Call for a termite inspection or pest treatment, or send an enquiry and we’ll ring you back to book a time.

Call 0412 466 600 Send an enquiry
Call now Identify Enquire